REFILL FILTER, LIGHT SE, POCKET, KIDS MASK WASHABILITY

Each AirPop Light SE, kids and Pocket mask, when properly cleaned and maintained, will continue performing at >98% filter efficiency for at least 40 hours of cumulative use.

To achieve this all masks should be cleaned with 70% alcohol for a minimum of 20 seconds and dried naturally >24 hours. 

Or alternatively, AirPop masks can also be hand washed with soap at 30°C and dried naturally >24 hours.

Airpop Light SE, kids and Pocket mask can also be machine washed on a delicate wash at 40°C on 45 minute cycle with mild detergent for up to 10 times and in our own tests, filtration continues to exceed >70% efficiency


ORIGINAL WASHABILITY

The exterior of all Original masks is impermeable to liquids so can be wiped down with a >70% alcohol unscented wipe or with a clean paper towel, soap, and water.

Each AirPop Original replaceable filter, when properly cleaned and maintained, will continue performing at >98% filter efficiency for at least 40 hours of wear time.

To achieve this all replaceable filters should be cleaned with 70% alcohol for a minimum of 20 seconds and dried naturally >24 hours. 


 

ACTIVE WASHABILITY

Active masks can be washed machine washed on a delicate detergent wash at 40° C on a 45-minute cycle and allowed to dry naturally >24 hours.

Each AirPop Active replaceable filter, when properly cleaned and maintained, will continue performing at >98% filter efficiency for at least 40 hours of wear time.

To achieve this all replaceable filters should be cleaned with 70% alcohol for a minimum of 20 seconds and dried naturally >24 hours.


ACTIVE+ HALO SMART WASHABILITY

NOTE: Remove the Halo sensor as per the instruction booklet before attempting to clean, wash or maintain your mask.


The Active+ mask outer (not the sensor) can be washed machine washed on a delicate detergent wash at 40° C on a 45-minute cycle and allowed to dry naturally >24 hours

 

Each AirPop Active+ replaceable filter, when properly cleaned and maintained, will continue performing at >98% filter efficiency for at least 40 hours of wear time.

To achieve this all replaceable filters should be cleaned with 70% alcohol for a minimum of 20 seconds and dried naturally >24 hours.

 

SKIN FRIENDLY

The materials used in all AirPop Masks are tested to DIN ISO 10993-5 2009-10 by an independent lab and are certified as hypoallergenic, non-toxic, and skin-friendly.

Al tests conducted by Hohenstein Institute. Full test reports are available in the support section.


WEAR TIME

Our masks can be used for over 40 hours of cumulative use before disposal.

Please follow the online instructions to take care of your mask.


BACTERIAL FILTRATION

All AirPop masks achieve 99.3% Filtration Efficiency of 0.3um particles (PFE) Test Method -  ASTM F2299 / F2299M-03

All AirPop masks also achieve 99.9% Bacterial Filtration Efficiency (BFE) Test Method - ASTM F2101-19

Al tests conducted by SGS Laboratories.
 Full test reports are available in the support section.

WATER RESISTANT

The outer layer of all AirPop masks is 100% resistant to splashes and droplets of all kinds.
 Test Method- ASTM F1862 / F1862M-17 (80mm Hg)

Al tests conducted by SGS Laboratories.
 Full reports available in the support section.

 

SIZE GUIDE

Please see our size guide here.