Each AirPop mask, when properly cleaned and maintained, will continue performing at >98% filter efficiency for at least 40 hours of wear time.

To achieve this all masks should be cleaned with 70% alcohol/soap and water for a minimum of 20 seconds and dried naturally >24 hours.

AirPop masks can also be machine washed only on delicate setting up to 10 times at 30°C on a 45-minute cycle and in our own tests filtration continues to exceed >70% efficiency.


The materials used in all AirPop Masks are tested to DIN ISO 10993-5 2009-10 by an independent lab and are certified as hypoallergenic, non-toxic, and skin-friendly.

Al tests conducted by Hohenstein Institute. Full test reports are available in the support section.


Our masks can be used for over 40 hours of cumulative use before disposal.

Please follow the online instructions to take care of your mask.


All AirPop masks achieve 99.3% Filtration Efficiency of 0.3um particles (PFE) Test Method -  ASTM F2299 / F2299M-03

All AirPop masks also achieve 99.9% Bacterial Filtration Efficiency (BFE) Test Method - ASTM F2101-19

Al tests conducted by SGS Laboratories.
 Full test reports are available in the support section.


The outer layer of all AirPop masks is 100% resistant to splashes and droplets of all kinds.
 Test Method- ASTM F1862 / F1862M-17 (80mm Hg)

Al tests conducted by SGS Laboratories.
 Full reports available in the support section.



Please see our size guide here.